Reedholm Systems will be closed December 23 – January 2, 2023. We hope everyone has a wonderful and safe holiday season!

Sometimes customers like the ability to use the vacuum chamber as a multi-purpose probing solution for a variety of applications – open air and under vacuum. Basic I-V, C-V and HF measurements using coaxial, triaxial, kelvin and HF probe arms, cables and connectors are used for open air and low voltage applications. When vacuum is required, the chamber is cleaned and sealed and operated to vacuum levels as low as 10-6 torr. Similar basic measurements under vacuum can be made as well as high voltage up to 10 KV. 

Click here for more information on SemiProbe Vacuum Probing

The SemiProbe family of vacuum probing systems have expanded due to new application requirements – high volume MEMS testing, High Voltage testing and 300 mm. SemiProbe has a family of manual, semiautomatic and fully automatic vacuum probing systems primarily to test MEMS and High Voltage Devices. MEMS Production Testing under Vacuum
Historical MEMS probing solutions involved manual and semiautomatic systems that were primarily used for research, device characterization and limited production. In the past two years systems were developed for production (24/7) applications that include material handling, pre-aligners, end-effectors, multiple black bodies, thermal (-60 C to 300 C), test equipment, customized graphical user interfaces (GUI) and vacuum levels to 10-6 torr. Most vacuum testing occurs between 10-3 torr and 10-6 torr. Individual manipulators (programmable) or a probe card are used to contact the device under test (DUT). Wafers tested range from 150 mm to 300 mm in size. Automated handling of the wafers is performed using a few methods – cassettes with wafers or cassettes with a carrier plates with wafers.

Click here for additional information on SemiProbe’s Vacuum Probing

1956 S. Austin
Georgetown, TX 78626

April 20, 2020

Due to forced component obsolescence by our suppliers, we find ourselves unable to process repair orders or modules for several items (VF-12 and VFIF-12, PAM-12 and PAM-16). Also, going forward, CPM modules will only be repaired on a best effort basis. Fortunately, we have fully supported replacements for each and all of the above.

We are offering significant discounts to customers who are able to take prompt action for ordering. It may take us some time to work through the backlog of demand, but everyone that orders before June 1, 2020 will receive preferential pricing. Note too that customers with a paid, active service agreement are eligible for an additional 10% discount.

The tables below summarize the discount schedule and some of the details. In the unlikely event that a software update is needed, that charge will be waived if replacement modules are ordered by June

1. We will also be following up with the primary contacts on record by email or phone. Also, please feel free to reach out directly if you know what you want to have quoted.

Please feel free to contact me if you have any questions. With regards,

Simon Black – COO

Reedholm Corp Drive/VFIF12 and PAM12/16 Notice – April 20 2020 Page 1 of 1

2019 Wide Bandgap Power Devices & Applications (WiPDA)
The State View Hotel
Raleigh, North Carolina
Booth # 6
October 29 – 31, 2019

2019 CS MANTECH

Hyatt Regency Minneapolis
1300 Nicollet Mall
Minneapolis, MN 55403
BOOTH #517

April 29th – May 2nd, 2019

2019 IEEE International Reliability Physics Symposium

Hyatt Regency Monterey
1 Golf Course Road
Monterey, CA 93940
BOOTH #4 & 5

March 31 – April 4, 2019

Reedholm Systems will be closed 12/24, 12/25, 12/31 & 1/1/2019